Prerequisites:
· The WorkCentre must have the latest firmware installed. You can download the firmware from the Xerox website.
· The Device must be ConnectKey/EIP capable.
· The DocuShare server must be able to directly communicate with the multifunction device over a network connection.
Settings for the WorkCentre 5700 Series
You use the CentreWare Internet Services interface to the MFP to configure the device settings.
When accessing CentreWare Internet Services, a login page may display prompting for a username and password. If you do not know the password, contact your administrator. The default password is 1111. If the administrator encounters a problem changing the password, or forgets the password, a service call must be placed.
1. Configure Machine Digital Certificate by doing the following:
a. Click the Index link located in the upper-right hand corner of the page.
b. Click the Custom Service Setup Link.
c. On the Custom Service Setup page under the Setup (Required) heading, click the Configure… or Edit… button next to HTTP (SSL).
d. Click the Configure Machine Digital Certificate link at the bottom of the page. (In a yellow box)
e. On the Machine Digital Certificate Management page, click the Create New Certificate button.
f. Under the Create New Certificate heading, select Self Signed Certificate.
g. Click the Continue button and fill in the required information.
h. Click the Apply button.
2. Configure Enabled HTTP (SSL) by doing the following:
a. Click the Index link located in the upper-right hand corner.
b. Click the Custom Service Setup link.
c. On the Custom Service Setup page under the Setup (Required) heading, click the Configure… or Edit… button next to HTTP(SSL).
d. On the HTTP page under the Secure HTTP (SSL) select Enabled.
e. Click the Save button
3. Configure Extensible Service Registration. Depending on the version of software installed on the WorkCentre, follow the steps in one of the options below:
Option 1
a. Click the Index link located in the upper-right hand corner of the page.
b. Click the Custom Service Setup link.
c. On the Custom Services Setup page, click the Edit button next to Custom Service Registration.
d. Enable all of the services except Xerox Secure Access.
Note: If Xerox Secure Access is required, then enable it.
e. Click the Save button.
f. On the Custom Service Setup page, select the following checkboxes:
· Export Password to Custom Services
· Display Custom Services Selection Button at local user interface
· Enable the Custom Services Browser.
g. Click the Apply button.
h. Under Properties on the left side of the page, click Connectivity.
i. Click Protocols.
j. Click the WSD (Web Services for Devices) link.
k. On the WSD (Web Service for Devices) page, select the Enabled checkbox.
l. Click the Apply button.
Option 2
a. Click the Index link located in the upper-right hand corner of the page.
b. Click the Custom Service Setup link.
c. On the Custom Service Setup page under the Setup (Required) heading. Click Configure… or Edit… button next to Extensible Service Registration.
d. On the HTTP Web Services page, configure the following settings:
· Extensible Service Registration: Enabled
· Scan Template Management: Enabled
· Session Data: Enabled
· Scan Extension: Enabled
· Device Configuration: Enabled
· Click the Save button.
Solution Published: June 18, 2010
Solution ID: 659