To Set Up a WorkCentre 93xx Device for ConnectKey:
Prerequisites:
· The WorkCentre must have the latest firmware installed. You can download the firmware from the Xerox website.
· The Device must be ConnectKey / EIP capable.
· The DocuShare server must be able to directly communicate with the multifunction device over a network connection.
Settings for the WorkCentre 9300 Series
You use the CentreWare Internet Services interface to the MFP to configure the device settings.
When accessing CentreWare Internet Services, a login page may display prompting for a username and password. If you do not know the password, contact your administrator. The default password is 1111. If the administrator encounters a problem changing the password, or forgets the password, a service call must be placed.
1. Configure Extensible Service Setup by doing the following:
a. Click on the Index link located in the upper-right hand corner of the page.
b. Click the Extensible Service Setup link.
c. Place a check mark in the checkbox labeled Export password to Extensible Services.
d. Place a check mark in the checkbox labeled Enable the Extensible Services Browser.
e. Click the Apply button.
f. On the Extensible Service Setup page under the Setup (Required), click the Configure… or Edit…button next to Extensible Service Registration.
g. On the HTTP Web Services page, configure the following settings:
· Extensible Service Registration: Enabled
· Scan Template Management: Enabled
· Scan Extension: Enabled
· Session Data: Enabled
e. Click the Save button.
2. Configure Security Certificates by doing the following:
a. Click the Index link located in the upper-right hand corner of the page.
b. Click the Security Certificates Link.
c. Click on the tab Xerox Device Certificate, or CA-Signed Device Certificate(s), or Root/Intermediate Trusted Certificate(s). Under the appropriate tab, select the button to create or install a certificate.
d. Enter the required information in the fields provided.
e. Click the Finish or Apply button.
3. Enable HTTP (SSL) by doing the following:
a. Click the Index link located in the upper-right hand corner of the page.
b. Click the Extensible Service Setup link.
c. On the Extensible Service Setup page under the Setup (Required), click the Configure… or Edit…button next to HTTP (SSL).
d. On the HTTP page, select Enabled in the configuration area under the Secure HTTPS.
e. Click the Apply button.
Solution Updated: August 10,2020
Solution ID: 961