To Set Up a WorkCentre 77x Device for ConnectKey:
Prerequisites:
· The WorkCentre must have the latest firmware installed. You can download the firmware from the Xerox website.
· The Device must be ConnectKey/EIP capable.
· The DocuShare server must be able to directly communicate with the multifunction device over a network connection.
Settings for the WorkCentre 7700 Series
You use the CentreWare Internet Service interface to the MFP to configure the device settings.
When accessing the CentreWare Internet Services, a login page may display prompting for a username and password. If you do not know the password, contact your administrator. The default password is 1111. If the administrator encounters a problem changing the password, or forgets the password, a service call must be placed.
1. Configure Machine Digital Certificate by doing the following:
a. Click on the Index link located in the upper-right hand corner of the page.
b. Click the Extensible Service Setup Link.
c. On the HTTP page under the Setup (Required) heading, click the Settings… or Edit… button next to HTTP (SSL).
d. Click the Configure Machine Digital Certificate link at the bottom of the page. (In a yellow box)
e. On the Machine Digital Certificate Management page, click the Create New Certificate button.
f. Under the Create New Certificate heading, select Self Signed Certificate.
g. Click the Continue button, enter the required information.
h. Click the Apply button.
2. Enable HTTP (SSL) by doing the following:
a. Click the Index link located in the upper-right hand corner of the page.
b. Click the Extensible Service Setup link.
c. On the Extensible Service Setup page under the Setup (Required) heading, click the Settings… or Edit…button next to HTTP (SSL).
d. On the HTTP page, select Enabled in the configuration area under Secure HTTP (SSL).
e. Click the Save button
3. Configure Extensible Service Registration by doing the following:
a. Click on the Index link located in the upper-right hand corner of the page.
b. Click the Extensible Service Setup link.
c. On the Extensible Service Setup page under the Setup (Required) heading, click the Settings.. or Edit…button next to the Extensible Service Registration.
d. On the HTTP Web Services page, configure the following settings:
· Extensible Service Registration: Enabled
· Scan Template Management: Enabled
· Session Data: Enabled
· Scan Extension: Enabled
· Device Configuration: Enabled
e. Click the Save button.
Solution Published: June 18, 2010
Solution ID: 660